-
## 环境信息
- ZFile 版本:`4.1.6 Pro`
- 部署方式:`Linux-脚本`
- 操作系统/设备:`Linux`
- 浏览器/版本号:`Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/126.0.0.0 Safari/537.36`
…
-
I'm using a Radxa CM3 module on a Raspberry Pi CM4 IO Board.
I built the image as described, and flashed it onto the internal eMMC.
The board starts U-Boot SPL, but then hangs after verifying the ch…
-
其他源码已经在使用python3-pyelftools。istoreos使用的是rk官方make_fit_atf.py
需要切换到python2的pyelftools
sudo apt install python2
python-pip现在直接被ubuntu删了,很烦,需要下载手动更新。
wget https://bootstrap.pypa.io/pip/2.7/get-pip.p…
-
I have recently seen [this webpage](https://www.bilibili.com/read/cv28853443/) (translated pdf attached)
One of the steps author did is different & not documented anywhere.
```
rk35xx/arch/ar…
-
Subscribe to this issue and stay notified about new [weekly trending repos in Shell](https://github.com/trending/shell?since=weekly)!
-
### 框架版本【必填】
12.6
### 问题描述【必填】
使用compose开发时,调用Toaster.show()报错,已在Application中初始化
### 复现步骤【必填】
使用compose开发,并在Application中初始化,在程序任何位置调用即可复现
### 是否必现【必填】
是
### 项目 targetSdkVersion【必填】
34
### 出现…
-
Hello,there! i have looked the `https://github.com/k2-fsa/sherpa-onnx/blob/master/scripts/whisper/export-onnx.py` it's a nice try to use whisper model in different platform by using ONNX format.
I'm…
-
Hardware: RK3568
Linux: 4,19.193, Android 11
reproduce:
long press the power button and tap shutdown, and then the debug uart dump follow messages:
```sh
[ 195.111079] init: Resume reboot m…
-
Hello.
I'm using OpenWRT Linux 6.1.53 with rk3568 microchip.
I'm sure dts and dtsi are spelled correctly. U-boot is also spelled correctly. All clks are indicated correctly, pins too.
I have 1 …
-
运行rknpu2/example/rknn_yolov5_demo 正常
但需要非640x640输入,需要rga缩放图片时报错,报错内容忘了,大概是api版本1.3.0过低,被废弃了。
后面编译在此仓库网盘链接的librga 1.9.1版本源码,并放在项目代码中。
运行报错:
/tmp/tmp.sTUryyl9sT/cmake-build-debug-rk3568/rknn_yolov5_…