-
Hello roleoroleo,
(sorry for my englisch ;)
i have YI Home Camera:
Yi 1080p Home | **QFUS - RFUS... | **9.0.35**...
Then I downloaded the _y291ga_ from https://github.com/roleoroleo/yi-hack…
-
- [ ] Open glider
- [ ] then what? :)
-
Seen on: 9.3.0-09eef33 rx:74 va:191
If the SD card is full, and you reformat the SD card, the SD card still shows as being full.
Rebooting causes free space to be recalculated, but this should not b…
-
Installed yocto on Raspberry Pi 3B and verified the setup after bootup.
DoD: - Added Meta-raspberrypi layer and generated the image of yocto in wic.bz2.
- Programmed and verified the image after b…
-
### Prerequisite Steps
- [X] I have searched existing issues
- [ ] This issue is not a duplicate of an existing one
- [X] I have checked the [EmuDeck Wiki](https://emudeck.github.io/)
- [X] I have re…
-
i bought an SD wifi PRO.
it is not entirely clear how can i access to system running on it.
(inserting as an ordinary SD card works fine)
- i set the dip switches to:
- 1: OFF (flash to SD)
…
-
Can't access to sd card from darkos
-
Add SD Card support for the onboard microSD/TF Card slot on the AIV DC31 Badge, as CircuitPython on the PicoW/Badger 2040W uses up 1.5/2MB onboard flash alone, before BadOS + it's assets and any user …
-
I am attempting to upgrade U-Boot on my board but there is no output after it starts. I did change v2024.01 instead of the release candidate.
DDR 9fffbe1e78 cym 24/02/04-10:09:20,fwver: v1.16
LPDD…
-
### Checks
- [X] I have checked existing [__OPL issues__](https://github.com/ps2homebrew/Open-PS2-Loader/issues) for duplicates and found none
- [X] I am using either OPL [latest stable version](h…