-
![117325219_243135156676731_1912531851176328428_n](https://user-images.githubusercontent.com/69296654/89721200-06995a00-d9db-11ea-9d31-c9f2656f2d23.png)
[config files.zip](https://github.com/Ma…
-
Ok so I installed the board correctly to my ender 3 pro, I then proceeded to download the recompiled firmware to my tf card, ( it’s the tmc2208 drivers) I renamed it to firmware.bin and then I put it …
-
Would like to enable E0_AUTO_FAN_PIN in the software to let the hot end cooling fan only run when its over a specific temperature (default is 50°C) but I can't get it to work.
Setting it to "FAN_PI…
-
looks like power-loss recovery is off or not working by default, is that by design (just trying to find out why)?
I am using firmware-tmc2208.bin
DIP V1.1 with tmc2208
-
### Bug Description
The watchdog initialization function in the HAL for STM32F is commented out, resulting in non operational watchdog. **When Marlin crashes on those boards, they stop mid-print wi…
-
I have an Ender 3 that i purchased a SKR E3 Mini Dip for. I was able to compile the firmware without to much trouble and even made a 3D Touch probe work with the probe and servo ports. My problem is t…
-
Hallo ich habe ein Problem..
Ich habe die Marlin kompiliert an meinem Ender 3 mit dem SKR E3 DIP mit TMC 2208 V3.0 im UART Modus.
Jetzt nach einigen test Drucken habe ich das Problem, das wenn ich …
-
I have problem using SKR-E3-DIP-V1.0 with TMC5160 (v1.2) drivers.
Configuration includes
```
#define X_DRIVER_TYPE TMC5160
#define TMC_USE_SW_SPI
#if AXIS_IS_TMC(X)
#define X_CURRENT …
n-e-g updated
4 years ago
-
Hi,
I am trying to get the most current Marlin 2.0 working from the official Marlin 2.0 page. The main issue seems to be that the newest TMCStepper 0.5.2 and STM32 5.7.0 do not work together and S…
-
Ender 5 Pro
E3D Hemera
SKR E3 Mini V1.2
BLTouch V3.1
Spool3D.ca cast aluminum bed
Raspberry Pi 4
### Bug Description
I am suffering from the exact same issues as the OP in #17262 . I think…