-
The "lower" of the USB ports (the one closer to the PCB) is dead in images produced according to your README. While it receives power, devices plugged into this port are not detected. The other "upper…
-
Interestingly enough the wifi device isn't showing up on the STM32MP157F-DK2, with the Ubuntu20.04 release, even though it's the same chip as on the STM32MP157C-DK2. I tried running the activate_wif…
-
Hi
I tested to build op-tee 3.17.0 for stm32mp1 however the boot hangs.
I am building optee-os using:
```
make PLATFORM=stm32mp1 CROSS_COMPILE_core=arm-linux-gnueabihf- CROSS_COMPILE_ta_arm64=…
-
I am using OPENSTLINUX distro and my board is stm32mp157f-dk2. I have included tpm2 and flashed the image. I have also included fTPM TA in my image. I want to get the tpm event log so I thought of usi…
-
Hi,
Thanks for sharing the code. We have cloned the source code but when we run the following script scripts/build-u-boot.sh
we are getting following error.
![Error](https://user-images.githubuser…
-
If I change "pwr_regulators" in tf-a-stmp32/fdts/stm32mp157c-odyssey.dtsi to support "SHUTDOWN" (set system_off_soc_mode = ), I get a WDT timeout when executing "shutdown -h 0" in linux. This prevent…
-
Can you please add the Libre AML-S905X-CC (LePotato) the pin info can be found at https://github.com/libre-computer-project/libretech-wiring-tool/blob/master/libre-computer/aml-s905x-cc/gpio.map
or…
-
USB devices will not auto mount to system.
-
Can you please add the Libre AML-S905X-CC (LePotato) the pin info can be found at [https://github.com/libre-computer-project/libretech-wiring-tool/blob/master/libre-computer/aml-s905x-cc/gpio.map](ht…
-
Hello,
thanks a lot for this project! I'll test that once the board is here, but to be honest I'm a bit confused by your highlighting of debug capability on the Octavo based board. Not sure if I read…