-
## Issue Description ##
I'm using an NI-2974 USRP (which is actually an X310 device), which is attached to an octoclock with 10MHz Ref und PPS Input.
I can succesfully synchronize on the external si…
-
Recently I am learning USRP to modify RFID, but I can not distinguish multiple tags normally. I want to ask what has been modified, or can you tell me how to run this source code? Thank you.
-
Hello!
Lately I have been doing some tests and writing code with an USRP x410 I have access to for the moment (via https://twitter.com/SDR_Radio).
Getting it working after flashing the correct i…
-
I'm using usrp x300 with gnuradio,After I run" My first position fix" demo,I set the configure file try to set up my own GPS receiver.https://gnss-sdr.org/conf/ the same configure file except I change…
-
Hi, Thanks for your code, it does help me a lot.
I use the SX1278 + Arduino as the sender, and USRP N210 as the receiver.
At the beginning, I set the parameter is: SF = 11, center freq = 434M, BW = …
-
Hello @herlesupreeth
Thanks alot for your help.
I was able to make mo-mt call with the setup.
But i have a little issue to have a stability. sometimes i can have a direct attach and make a call a…
-
**### Issue Description**
I have successfully installed RF front end drivers such as UHD 3.15 for detection of USRP X310 on virtual machine having OS Ubuntu and after it, I want to install open sou…
-
Hi,
I am using OpenBTS GSM with USRP N210. When the UE is attached, it does not have any IP Address assigned to it. I queried using the CLI Command, sgsn list, and it shows the list of devices atta…
-
Thanks for great project!
I successfully built the [toolchain](https://github.com/bastibl/gnuradio-android) and tried to run android-fm on my experimental Pixel 3a with Android 9 Pie.
I plugged…
-
When generating a sphinx documentation with the github-tools extension the URLs to source files is not rewritten and still contains an underscore (e.g. '_modules/....').
An example can be found at: h…
pd0wm updated
9 years ago