-
Could you contact me?
I'm tracking down a crc issue with the modbus interface.
If you have time/desire to help....
-
My /etc/inverter/inverter.conf contains:
device=/dev/hidraw0
run_interval=1
amperage_factor=1.0
watt_factor=1.01
Calling `stdbuf -e0 -o0 strace -s2048 ./inverter_poller -d |&tee e` contains […
-
This UPS appears to be Megatec like. If I run the NUT driver nutdrv_qx first, it fails to start. However, if I run the manufacturers software first (a linux binary supplied on a cd), close it, then …
-
PowerWalker VFI 1000 CG PF1 tested successfully with nutdrv_qx
Also works with blazer_usb, do you need an additional issue for this?
Link to manufacturer: https://powerwalker.com/?page=product&…
-
I am relatively new to home assistant.
I have a home assistant blue which is working properly.
I have added the network ups tools add on to my assistant.
I am now trying to add the n u t integratio…
-
Sadly tried everything, seems something is off
-
Hi Syssi, I'm haveing issues with your code, the board is constantly rebooting, I just installed your example with this result:
[14:16:14]
[14:16:14]Rebooting...
[14:16:14]ets Jun 8 2016 00:22:5…
rem72 updated
3 years ago
-
Hello,
During compilation I am getting an error below:
pi@raspberrypi:~/isv $ make
gcc -O2 -std=c99 -Wall -W `pkg-config --cflags hidapi-hidraw` -c isv.c -I. -o isv.o
Package hidapi-hidraw was…
-
Hello,
I just started the script and getting the following error below. Do you know what could be wrong ?
PHP Warning: mkdir(): No such file or directory in /etc/infinipoll10k/infinipoll10k.php…
-
I followed your procedure but I must make several errors because it does not work.
I manage to extract the information from the BMS but the database remains empty
can someone help me?
`pi@raspb…