-
Is the relay type broken?
when I set receiver=other, I see 2 connections opened on the host, and data flows directly to FA.
if I then change the receiver type to relay, I never see any connections g…
-
In areas with low UAT traffic, the data stream `dump978 (raw) -> uat2esnt -> readsb` will disconnect when there's no traffic after a while. This is causing a lot of connects / disconnects that are vi…
-
- System: ubuntu-focal (5.4.0-109-generic)
- rocm-5.2.1
- GPU: MI250X
I am trying to set the memory clock frequency using `rocm-smi`, and it fails with the `RSMI_STATUS_PERMISSION` error. The p…
-
1. Stratux version:
2. Stratux config:
SDR
- [ ] single
- [X ] dual
GPS
- [ X] yes
- [ ] no
type:
AHRS
- [ X] yes
- [ ] no
…
-
# Effortless Dual Mining Guide: WingBits and DeFli Setup
Learn how to set up dual mining with WingBits and DeFli in this comprehensive guide. Maximize your crypto mining potential effortlessly.
[htt…
-
Hi, i've tried many times to parse the flights with an R820T tuner, but every time `./dump1090 --interactive --net` is giving me the empty list.
That's the result, that is showing after running a …
-
```
$sudo systemctl status dump978-fa
● dump978-fa.service - dump978 ADS-B UAT receiver
Loaded: loaded (/lib/systemd/system/dump978-fa.service; enabled; vendor preset: enabled)
Active: a…
-
![EachineE010_Rev2](https://user-images.githubusercontent.com/44196207/102464224-0dba2e00-4087-11eb-8d95-dc56511fb82d.jpg)
Aliexpress link: https://www.aliexpress.com/item/32741187900.html?spm=a2g0…
-
Can't find a community forum for this tool. And that IRC link seems not the place to ask something "quick" :)
Running dump190 and acarsdeco. I see the planes fine, source is dump1090. I see the la…
-
I just compiled the latest build to get my RTL-SDR v4 to work, and it did..
But now the older SDR I had no longer can detect anything..
I followed the direction to the tee..
What am I doing…