-
Hello Mark.
Recently I became interested in your "horusdemodlib" program to receive 4fsk signals on RPI4.
My RPI is without a monitor.
I communicate with her via ssh from my big PC.
How can I run …
-
It now has some ROM space to add the support to transit WSPR beacons.
We can create a simple webpage to encode the data of the callsign, position, 5w for WSPR. This will creates a symbol list with …
-
First, thanks for this tool and the corresponding talk!
I guess I’m exactly the person you’re talking about, too little radio experience and completely thrown back by the scariness of the Gnuradio cl…
-
##### Is your feature request related to a problem?
I Am trying to analyze a wireless signal from a network of sensors, or, should I say "things".
they are using, probably some kind of cheap hardwar…
-
In version c1fe152bfa82e7a032fb126ad691680218dbe8d6, as well as all previous versions, 4PSK waveforms have a noticeably lower amplitude than 4FSK.
In a sample recording of [4PSK.200.100S](https://…
-
I've gone on a bit of a mission to see if it is possible to use the QRP-Labs QDX with Winlink. As the QDX only supports single carrier modes, I'd like to be able to only enable FSK modes with ardopc.
…
-
On my duplex hat I have tested VHF only and UHF only split frequencies and works fine.
If I try to set duplex hat TX to VHF and RX to UHF or TX to UHF and RX to VHF,
the duplex will TX on set f…
-
A while ago I wrote some Gnuradio blocks to implement the Yaesu System Fusion digital voice protocol. I have been talking to Derek Kozel about merging some of these blocks into the core of Gnuradio (r…
-
can you change the cal PA0CAB lastfligt to PA0CAB memorial
He is nouw silant key
plays remove 15, PA0CAB-4FSK and 449, PA0CAB and 449, PA0CAB
Thanks pe1glg han van der sterre
-
Hi,
Please add the new ID SQ9CIN-4FSK to the ID list. Could be the next available number "607". thank you
73 SQ9CIN