-
My kernel version is 5.4.59-v7+
The error appears when executing "make"
Guille M
hace 23 minutos
Doesnt work for e :(
The error comes when executing make after the first error:
: note: t…
-
`'make' -j8 KVER=5.10.110 KSRC=/lib/modules/5.10.110/build`
ERROR: modpost: module 88x2bu uses symbol kernel_write from namespace VFS_internal_I_am_really_a_filesystem_and_am_NOT_a_driver, but does…
-
Hi. Just got a TP-Link Archer T4U (v3). I'm running Debian Sid with stable kernel 5.2.11. GCC 4:8.3.0-1. Following the dkms instructions, the build fails with the errors below.
$ sudo dkms build -m…
-
**Device**: TP-Link AC1300
```
> lsusb
Bus 001 Device 017: ID 2357:0138 TP-Link
```
Kernel SHA: [c57b1153a58a6263863667296b5f00933fc46a4f](https://git.kernel.org/pub/scm/linux/kernel/git/stab…
-
Freshly installed Linux Mint 20.2:
me@LMINT:~/Downloads/rtl88x2bu-5.8.7.1_35809.20191129_COEX20191120-7777$ insmod 88x2bu.ko
insmod: ERROR: could not insert module 88x2bu.ko: Operation not perm
-
The module panics when loaded automatically or through `modprobe 88x2bu`.
Log:
```
[ 61.202994] RTW: module init start
[ 61.206409] RTW: rtl88x2bu v5.8.7.4_37264.20200922_COEX20191120-7777…
-
I cant build the driver, on Ubuntu 21.10. I has always built before on the same machine. Please help, thanks
-
sudo modprobe 88x2bu
modprobe: ERROR: could not insert '88x2bu': Key was rejected by service
This is after compiling per the instructions in Manual Installation (sudo make sign-install) with no er…
-
I looked at [morrownr/88x2bu-20210702#42 ](https://github.com/morrownr/88x2bu-20210702/issues/42) and used [8814au.tar.gz](https://github.com/morrownr/88x2bu-20210702/files/8403712/rtl8814au.tar.gz), …
-
On Raspberry Pi 4, I can build and install the module rtl88x2bu/5.6.1 with dkms using the steps described in the README.
But when I perform `sudo modprobe 88x2bu` to load the module I get this erro…