-
I'm stuck on creating a task that can upload data in parallell to gathering data. I can't for the life of me not get this to work. When the task ("gathering data" and "sending data") are running on th…
-
Hello!
I am using the board LILYGO T-A7608E-H. And i Have an issue. I have configured the SIM module for 921600 baud speed (with AT command). But when i try different modes (automatic, LTE, WCDMA, 2G…
-
Hi,
the simcom module is set to turn on automatically when the board wakes up from deep sleep. This is inconvenient, since I do not need the modem to turn on every time the board wakes up from sle…
-
Hi, do you have examples to access AWS MQTT through the RootCA, device cert and private key ?
-
In [TinyGSM_Net_GNSS.ino](https://github.com/Xinyuan-LilyGO/T-A7608X/blob/main/examples/Arduino/TinyGSM_Net_GNSS/TinyGSM_Net_GNSS.ino)
we can find the following to power off the modem:
```
// T…
-
I can't seem to understand how BAT_EN (IO12) works. I have a board versioned 2022-5-22 V1.1. Can you explain?
Both do nothing at all, battery is controlled only with switch:
```
pinMode(BAT_EN,…
-
Hi,
this repo is missing some docs on the function of the LED on this board. For instance, what is the purpose of the two red LEDs next to the GSM antenna attachment point?
Thanks
-
Is there an official way of using it for development?
-
As the title says, it is unclear if the board is equipped with a solar charge controller device.
Clarifying this information in the main page would help.
Thanks.