-
Hi! I'm having some problems with library. Right now I can init, start, stop motors, with smooth acceleration/deceleration (with Python on Raspberry Pi). Unfortunately, there are 2 things which don't …
-
I would like to use it with DRV8825 or with an A4988.
Thanks so much for the software
-
The "move complete command" in AccelStepper lists value 0x0b in
protocol/accelStepperFirmata.md . However, the implementations use 0x0a:
https://github.com/firmata/firmata.js/blob/488964da379b13…
-
Hi,
it seems to me that with changes made from v 1.12.5 (d5daf2e1) to 1.12.6beta (38586cea) my esp32 build crashes with a
```
Guru Meditation Error: Core 1 panic'ed (LoadProhibited). Exception w…
dc6jn updated
5 months ago
-
Hi,
as far as I know is in a 4 phase full step mode, the value for the sequence zero **0b1010** and for sequence two **0b0101**. You can find this sequences in lots of stepper theroy books too.
…
-
here's the code
if (stepCommand == ACCELSTEPPER_STOP) {
if (stepper[deviceNum]) {
stepper[deviceNum]->stop();
isRunning[deviceNum] = false;
reportPositio…
-
Hi, I try use adafruit motor shield for eggduino, make some changes like this:
`// two stepper motors one on each port`
`AF_Stepper rotAFMotor(200, rotMotorNumber);`
`AF_Stepper penAFMotor(200, penMo…
krikz updated
8 years ago
-
Currently, the used stepper library is CPU-bound and does not cooperate well with other CPU tasks. This results in stepper pulse jitter even on quite low stepping frequencies, making microstepping qui…
-
Seems update is no longer in use but I can't currently find documentation on correct usage.
```
C:\Users\User\AppData\Local\Temp\.arduinoIDE-unsaved2024617-8852-k8r478.pp7ce\sketch_jul17b\…
-
I tested the following sketch using a TB6600 on the Arduino UNO R3, R4 Minima, and R4 WIFI. The R3 works perfectly, but the R4 boards do not. The motor attempts to turn but simply stutters. If I insta…