-
Hello!
I successfuly installed the rtl-433, when I run it in the terminal then I see the received Accurite Tower data: id- chanel- temp, humid...
I tried all this things: Please help!
The config
{…
-
I have tried frequency hopping from 433 to 915 with no luck. Whatever frequency is specified first in the command works, but the second does not. I have tried two SDRs with mixed success, however I am…
-
The application initially crashed with a segmentation fault shortly after startup. After a little experimenting I discovered it runs fine with root privileges, the crash only happening when running as…
-
When I run `rtl_433` with a [NooElec device](https://www.nooelec.com/store/sdr/sdr-receivers/nesdr-mini.html) it's picking up various sensors at my location. OTOH, F0 picks up only 2 of them.
F0 pi…
-
### Latest firmware used?
Be sure you tried the [latest release](https://github.com/Portisch/RF-Bridge-EFM8BB1/releases) or the [newest binary](https://github.com/Portisch/RF-Bridge-EFM8BB1/blob/mast…
-
I have a SDR connected to my RPi3B that has been receiving several sensors correctly for months without issue. I noticed my Acurite 5in1 weather station stopped receiving recently for some reason. T…
-
Consider adding a "strict" id and channel matcher mode to restrict to only the specific sensors you wish to monitor.
Use Case:
I've observed Acurite-Tower sensors occasionally changing the channel…
-
I am currently testing the Model 06002M / 592TXR and according to the datasheet it has both temperature and humidity sensors, but the sniffer code is only for the temperature. I'm assuming the data is…
-
Hi there!
Using this conf file (built off the one provided - /config/rtl_433/rtl_433.conf - password section)
Version: ` 2024.6.0`
```
## version 2024.3
report_meta stats
report_meta t…
-
After updating to any version higher than 0.19b both outdoor sensors acurite 00275RM (code 74) become unavaliable.
Data from sensors transmitted to mqtt but the home assistant considers that these de…