-
Per brubell suggestion, placeholder for discussion around **integrating basic OTA functionality into AdafruitIO_Wifi** for ESP32, ESP8266 and friends.
see also https://forums.adafruit.com/viewtopic…
-
I am working with ADAFRUIT FEATHER HUZZAH board esp8266 and am receiving this error :
> connected with Moriarty, channel 11
dhcp client start...
ip:192.168.43.126,mask:255.255.255.0,gw:192.168.4…
-
**Describe the bug**
Malformed packets being sent to non-WipperSnapper Adafruit IO feeds cause Adafruit IO to publish an error along the MQTT error feed(https://io.adafruit.com/api/docs/mqtt.html#u…
-
I'm using an Adafruit Huzzah Feather (esp8266 based, arduino compatible) and Arduino 1.6.13. The code loads and runs fine. I've enabled the udp serial print messages and can see Alexa sending an M-SEA…
-
Not sure what libraries you were using for this build but I can't get it to build in Arduino constantly getting
no matching function for call to 'SDClass::begin()'
Don't suppose you can remembe…
-
I'm trying to use your PPM-Reader with an Adafruit ESP32 Huzzah Feather and I'm not able to get anything but zeros for all 6 channels. I'm using a Radiolink T8S transmitter and an R8EF receiver. The …
-
Recently installed EspExceptionDecoder and it decodes the Exception fine, but never returns stack results.
Is there any log I can check to help debug this?
Arduino IDE 1.6.12 on Mac OS X 10.11.6…
-
I am getting the follow error when trying to connect to the IoT Hub
`------------------------------------
Fatal exception 3(LoadStoreErrorCause):
epc1=0x4000bf64, epc2=0x00000000, epc3=0x00000000, …
-
**Describe the bug**
My development board can't establish a connection to Adafruit IO when I follow the official quick-start guide ([link](https://learn.adafruit.com/quickstart-adafruit-io-wippersnap…
-
Beginning Azure IoT Hub Client... NTP server 0 set to: pool.ntp.org
NTP time zone set to: 0, result: OK
--Set daylight OFF
Short sync interval set to 5
Long sync interval set to 1800
Time sync s…