-
### What happened?
Using Adalight via serial, I'm getting intermittent glitches towards the end of the signal going to the ESP.
Out of my 116 pixels, the ones up to pixel 85 are fine, pixels > pos 8…
-
```
Mood mode or screen capture mode only works for a few seconds. Then all LEDs
are turned off. When changing capture parameters LEDs are turned on again.
```
Original issue reported on code.googl…
-
I attempted to use the Adalight code with my second screen, but no matter what I did the colors seemed to be coming from the primary display.
After some debugging, the issue seemed to be coming from …
-
## Bug report, debug log and your config file (FULL LOGS ARE MANDATORY)
2024-05-13T22:57:31.923Z [CORE] TTY is not attached to the log output
2024-05-13T22:57:31.981Z [MAIN] Database…
-
### What happened?
"WLED is receiving live USB Adalight/TPM" data" The Configuration applies successfully but after exiting of Prismatik for example. The configuration returns to the default configur…
-
```
Would be great if you guys could increase number of leds for Adalight Project
for 100 pieces. It shouldn't be a problem since it's already supports 50 leds.
Am I right?
Thanks!
```
Original i…
-
I have two Monitors with Adalight + Arduino Nano
one for Gaming one for Movies with different LED Setups.
Proplem is the Profiles dont change the SerialPort (COM3 & COM4)
so I must everytime switch…
-
```
Mood mode or screen capture mode only works for a few seconds. Then all LEDs
are turned off. When changing capture parameters LEDs are turned on again.
```
Original issue reported on code.googl…
-
Software 5.11.2.31
TL:DR: Need to restart Prismatik or recongigure the device to get Adalight working again after Adalight (WLED) LED string is power cycled.
I have WLED controller powering a LE…
-
Hello,
I have setup mentioned above, and after around 10 mins of usage, I have constant flashing same as on video below
https://www.youtube.com/watch?v=xHdZHHp_NBI&ab_channel=PetrLuke%C5%A1
I t…