-
I set up the toolchain according to the guide and tried to compile the non-modified pipeline_a2dp_sink_and_hfp application from the examples. I copied the `examples` folder from the repo root to `esp-…
-
Hello after i flash the source without errors i get these errors on startup:
rst:0x3 (SW_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_dr…
-
I bought a "ESP32 Audio Kit v2.2 2957" and installed the toolchain as described in this readly, and the ADF (+IDF) from this repo.
I can compile and flash all examples I tried so far (here, e.g. ESP3…
-
I am trying to communicate two devices. One broadcasting based on Ra-02 Aithinker SX1278 433MHz using arduino-LoRa library (demo sender).
https://www.disk91.com/2019/technology/lora/first-steps-with…
-
### PROBLEM DESCRIPTION
Gibt es eine Dokumentation zu ESP32CAM.
Was muß ich wo einstellen?
Wird in der Web Ansicht von Tasmoto das Bild der Cam dargestellt?
Viele Grüße
### REQUESTED IN…
-
Great library! Thanks !
I found one error in file: FileServer.h
`line 60: html += F("
-
There have been many comments and posts relating to `OSError: Camera Init Failed` error when trying to initialize the camera. I have reviewed every post, which the most recent was over a half a year a…
-
I'm using the following image:
`MicroPython v1.20.0-206-g33b403dfb-kaki5 on 2023-07-11; ESP32 CAMERA w/SSL (KAKI5) with ESP32` on an AiThinker ESP32-CAM.
When listening for incoming UDP packets,…
-
Hi Kevin,
I've been trying to make ESP32-CAM [ex1](https://www.banggood.com/Geekcreit-ESP32-CAM-WiFi-+-Bluetooth-Camera-Module-Development-Board-ESP32-With-Camera-Module-OV2640--p-1394679.html?rmmds…
-
Hi,
I receive lots of messages "error sending udp packet" in the console.
When I turned on 'Core debug level: Error' I started to receive an explanation:
[E][WiFiUdp.cpp:183] endPacket(): could n…