-
The default max clock speed is set to 900mhz which will lock up the device if set to or above 798mhz.
The proposal is to set the "cpuMax" value to 798mhz to prevent lockups.
![image](https://user-im…
-
I downloaded the latest windows env and checked out the latest rt-thread. When I simply want to compile a BSP I get the following error.
Could someone tell me how to solve this issue?
`TAARIMI7@…
-
Hi Nick,
Fantastic work on the LicheePi Nano. I was hoping to use your repo as a starting point to getting the MangoPi-R3c board working, as the vendors Buildroot repo [here](https://github.com/ma…
-
I'm guessing that since the kernel got updated, the default scripts which were "hard-coded" to k 5.4 won't work anymore
```
INSTALL /home/munin/Projecs/lichee_project/unf_buildroot/buildroot-2022…
-
I don't know if it's the problem with device itself, OS it runs on, but anyway:
I tried to build Picodrive for Miyoo devices, the cheap handhelds running on ARM Allwinner F1C100s working with some …
-
@johang Recently I got Lichee Pi Zero, trying to boot it up, but no success. Any hint of what and where I need to look to solve this issue?
```
U-Boot SPL 2020.10 (Oct 12 2020 - 23:08:36 +0000)
DRA…
-
U-Boot 2022.01 (Apr 01 2022 - 03:47:48 +0000) Allwinner Technology
CPU: Allwinner V3s (SUN8I 1681)
Model: Lichee Pi Zero
DRAM: 64 MiB
WDT: Not starting watchdog@1c20ca0
MMC: mmc@1c0f000:…
-
Hello
I’d love to install a custom Marlin FW on my new Ender 3. A few annoying things have been disabled by default.
Anyway the board is new, powered by a STM32F103RCT6. I tried to trace the pins b…
-
Hi, your repo builds fine, but the resulting sd card image fails to boot in a MangoPi-R3c, with a kernel panic error. The vendor, MangoPi SBC forked your repo to support the MangoPi-R, but the result …
-
I've been trying to use the default mangopi defconfig and am encountering some problems:
* mtd subsystem is present along with spinand support in u-boot but lacking the gigadevice spi flash
* usb …