-
- [ ] battery: add connector, choose cell
- [ ] antenna: current antenna fine? possible to do something like airtag antenna?
- [ ] peripherals: not sure if anything else is needed. USB-C?
- [ ] rou…
-
My current conclusion is that adding another node (e.g., 62d0) acts as a relay to enable communications between Packard (44fc) and Durand (fcb4) on Channel 104 - thereby indicating an issue with the Y…
-
-
The 4G modem at AMS keeps falling back to 2G due to poor signal.
We should try upgrade the antenna to see if it helps.
-
I'm a contributer for FR24, and I have for a long time (without the right skillset) wanted to integrate (locally, or via web) with Home assistant to be able to monitor what *my specific antenna* is se…
-
### Platform
ESP8266
### Assembly
I did the assembly by myself
### nRF24L01+ Module
nRF24L01+ plus
### Antenna
external antenna
### Power Stabilization
Elko (~100uF)
### Connection picture
…
-
I am still a little bit confused about the antenna and feed geometry we should record in the MSv4 antenna_xds.
To help figure things out, I created a Google drawing and inserted two images of a teles…
-
Received and began working with the FobosSDR yesterday. In 22.04 with Soapy 8.x I observed the following.
CubicSDR was unable to load due to it saying
`what (): setAntenna() not supported`
In …
-
Today I installed the latest version available in this repository.
**ERRORS**:
1. USB port:
I connected a USB storage device via OTG but it is not recognized by the OS, neither is my external an…
-
I use USRP X310, which has two port for RX.
Now, I can use one antenna reveive the signal and demodulate the signal via:"iridium-extractor -D 4 examples/usrp-b2x0-uhd.conf > output.bits", this com…