-
https://github.com/SmartThingsCommunity/SmartThingsEdgeDrivers/blob/main/drivers/SmartThings/matter-lock/fingerprints.yml
matterManufacturer:
#Aqara
- id: "4447/10242"
deviceLabel: Aqara S…
-
Hey, I have an Android tabloid and a Aqara Presence Sensor FP2 that I don't reach from my Homey.
I have setup Net Scan to scan these two devices using there IP addresses but both of them are reported…
-
Hello,
I've 3 camera G2 ZNSXJ12LM (chinese version) that I would like to add to my HA Environement.
I've understood that unfortunately this G2 chinese version don'y have mqtt so it's not possible to…
-
I have chinese version of the Aqara g2h. I am trying to enable telnet but nothing happens, When i try to telnet 192.168.1.28 I get connection refused. I also tried to connect it to the aquara home app…
-
The wantread message indicates that the socket is not ready to read data yet and the operation should be retried later. This happens when you're trying to read data from a socket, but the data isn't a…
-
Aqara T1 E27 LED Bulb missing controls - power-off memory, on\off-transition time
https://home.miot-spec.com/spec?type=urn:miot-spec-v2:device:light:0000A001:lumi-acn014:1
![image](https…
-
### The problem
When the temperature drops below 1°C the temperature indicator indicates weird values, such as jumping from 1° to 80°
The temp displayed inside the aqara app is correct
![Capture d’…
-
I use an Ethernet cable to connect the router and the network management. Because I restart the router once a week, the plugin will be disconnected and cannot reconnect. You must re-add the gateway in…
-
Hi syssi,
before the update to 2024.8.1.1, there was a possibility to display a room temp from an external sensor.
I mean this part of the config:
climate:
- platform: xiaomi_miio_aircondi…
-
I have downgraded the software to version 3.3.4. Reseted the camera and pressed for 10 seconds to activate pairing mode, but for some reason it won't read any QR code (aQRootg3.py generated or origina…