-
Es gibt in der [platformio.ini](https://github.com/RFD-FHEM/SIGNALDuino/blob/master/platformio.ini) unterschiedliche Events. Mir ist aufgefallen, das 2 identische Event eingetragen sind.
```
[env:…
-
First of all, thank you so much for your library, it's great。
This is my case, I use the arduino nano as the motor controller and the TB6612 as the driver。
![13E7618E-96A6-4E1B-A608-1BE0645DF8C4](ht…
-
Hi all,
I am running rotorhazard v4.1.1 with a DIY hardware setup of four aduino nanos with four rx5808 VRXs (the delta5 setup).
Rotorhazard recognises the four arduinos but when i go to Rotorhaz…
-
**Describe the problem you have/What new integration you would like**
Please add support in ESPHome for the new Arduino ESP32 Nano.
**Please describe your use case for this integration and a…
-
Standard pin names as `D10` are unknown for the Nano RP2040.
- Arduino IDE 2.3.2
- Arduino Mbed OS Nano Boards 4.1.5
- FQBN: `FQBN: arduino:mbed_nano:nanorp2040connect`
```
loading library …
-
Hi,
I have used one of the examples from the library and tried to compile it to my new Arduino wifi rev. 2 board,but I get the following error message:
------------------
Arduino: 1.8.8 (Windows …
-
- Arduino board: Espressif ESP32 3.0.4
- Arduino IDE version: 1.8.19 and 2.3.2
Choose the Arduino Nano ESP32 from the Espressif esp32 board.
Partition Scheme: With FAT
Pin Numbering: By GPIO…
-
I'm trying to get set up with the Arduino Nano RP2040 Connect board, but can't get the blinky example to work. I've tested that the Arduino IDE can program its own blinky example (so the board/LED de…
-
### Port, board and/or hardware
RP2, Board Arduino Nano Connect 2040 with NINA W102 module.
### MicroPython version
MicroPython v1.24.0-preview.118.g5f3ecc29f on 2024-07-20; Arduino Nano RP20…
-
https://store.arduino.cc/usa/nano-33-iot
The Arduino Nano 33 IoT is a low-cost Arduino board with a SAMD21 host processor and U-Blox NINA modem. The firmware is [custom](https://github.com/arduino/…