-
So I first followed the following instruction
https://github.com/Cleric-K/vJoySerialFeeder/blob/master/Docs/Sbus.md
which I then connect it to my [FrSky R8 pro](https://www.frsky-rc.com/product/…
-
I see the processing interface is not receiving the right value. Would you mind sharing your arduino program (.ino file) that can communicate the received sbus to this processing. Thanks.
-
### ArcticRover firmware version
_No response_
### Area(s) with issue?
Remote Control
### Steps to reproduce
RF losses are very frequent. It is not practical to drive the rover more than ~20m awa…
-
It works and I get all Sensor Data from PowerBox Pioneer to my FrSky Horrus X10S Express, but if Converter is connected between PowerBox and Receiver, I get Servo Jitter on all 16 channels.
I had fla…
-
how can i connect sbus transmitter which you made to this transmitter what i have to select in ports pleas tell
-
Add SBUS (not inverted) to send RC commands to FC.
The code is written, based on Paweł Spychalski's implementation (https://quadmeup.com/generate-s-bus-with-arduino-in-a-simple-way/).
Prelimianary …
-
Hy, it uses fine on Mega, on UNO but seems stucked on NANO V3 (ATmega328p), is it not possible ? I have add Softawre serial to be able to readsome debugs which work on UNO but no possibility to see an…
ghost updated
5 years ago
-
Hello, thank you for your hard work.
I am trying to set up a D8 protocol receiver with a NANO.
I would like to use SoftwareSerial, so as to debug via USB.
is this possible?
thank you
-
Hey- Thanks a ton for creating this library. I am trying to connect my Futaba SBUS receiver to my Arduino Uno (I also have a Mega so have tried troubleshooting with that too). No matter what I do, I c…
-
Hello!
I can't find any method of contacting you other than through the issue tracker..
I have used your schematic and code to build my own SBus to Spektrum converter. It's nearly done (board built,…