-
I use platformio Vscode and this library to develop arudino nano 33 IOT, it works fine at the beginning, but when I update the library, I find that vscode prompts me to exist Invalid conversion proble…
-
Hi i'm using arduino ide 1.8.13 and added the latest esp32 core , if i buy a 16MB esp32 board how can i choose to have for example 8 MB for app and 8 MB for SPIFFS?
i need to have OTA.
this problem …
-
I've been wondering if it's possible to have support for STM8S boards since STM32 is already supported. Not sure what would be the problem on supporting these boards.
I had tried using the existing…
-
Hello! I have been trying to use RPI Pico instead of the Arduino. When I attempt to upload the slave sketch the error pops up saying that the RPI Pico is not compatible with the ArduinoUniqueID librar…
-
In file included from uniqueID.cpp:4:0:
uniqueID.h:24:2: error: #error "ArduinoUniqueID only works on AVR, SAM, SAMD, STM32, Teensy, megaAVR and ESP Architecture"
#error "ArduinoUniqueID only works…
-
Devoloper Mode should allow a set once (If null) feature to assign the station, port and meter serial numbers. Wiping would require full FLASH/EEPROM erase.
This serial number should be avaliable i…
-
I have 3 blue pills (STM32F***) that were working like a charm with a diff of 600.
Since yesterday they can't connect to server.
```
21:23:22 net0 Connected to master Duino-Coin server (v2.7)
…
-
RAPI command to SET and GET Serial Numbers required by OCPP.
station chassis
connector
meter
Proposed format
SET command write once only if EEPROM serial numbers are blank. EEPROM could also …
-
I have 1 ESP8266 and 6 Arduino Nano. But I only get 11-12 Duino Coins per day, and I donot know why.
I find the 6 Arduino Nano print same unique ID after their job has been done.
I donnot know if …
-
it would make the math faster.
Needs investigation what the error will be.
(rather simple)