-
I am testing the library on an ESP8266 based board and samples don't work without codes modifications.
First, I must replace this code bloc with just ` #include ` because otherwise I have a compile…
-
I am trying to provision a AVR IoT WA board with the provided iot provision tool. I have tried so far on two different computers both running MacOS Catalina.
The output of the tool when using the c…
-
```
For a variety of ATtiny chips (x4, x5, x61 and ATmega161), the respective avr
iot define files define BIN to 7 for Bipolar Input Mode in ADCSRB.
The core Print.h defines BIN to be 2.
This leads…
-
Pin/port/register macros not defined in `cores/Arduino.h`, including:
`digitalPinToPort`
`portOutputRegister`
`digitalPinToBitMask`
Found while trying to use `Adafruit_SSD1351` OLED display libr…
-
I left the device connected to the internet and it was uploading to Azure as expected. Initially a little bit too fast, 1 update per second, which would cause problems with the free Azure service havi…
-
```
For a variety of ATtiny chips (x4, x5, x61 and ATmega161), the respective avr
iot define files define BIN to 7 for Bipolar Input Mode in ADCSRB.
The core Print.h defines BIN to be 2.
This leads…
-
```
For a variety of ATtiny chips (x4, x5, x61 and ATmega161), the respective avr
iot define files define BIN to 7 for Bipolar Input Mode in ADCSRB.
The core Print.h defines BIN to be 2.
This leads…
-
Hi guys!
When compiling for a digispark, I get a lot of warning noise. I do not know how important this is but it makes me at least nervous every time I compile my code :-)
It boils down to
- …
-
```
For a variety of ATtiny chips (x4, x5, x61 and ATmega161), the respective avr
iot define files define BIN to 7 for Bipolar Input Mode in ADCSRB.
The core Print.h defines BIN to be 2.
This leads…
-
```
For a variety of ATtiny chips (x4, x5, x61 and ATmega161), the respective avr
iot define files define BIN to 7 for Bipolar Input Mode in ADCSRB.
The core Print.h defines BIN to be 2.
This leads…