-
On an atmega328 the optiboot.hex bootloader in avr_debug/bootloader/optiboot/Debug writes 44 as the version number in 7ffe, 7fff but avr8-stub checks for and requires >= 8 in 7fff when AVR8_BREAKPOINT…
-
By setting fuses, I have enabled CRC scan of boot section during boot. The CRC scan fails.
Then, I perform chip erase by running:
```
sudo pymcuprog erase -i updi -d avr64ea48
```
That do…
-
### Describe the Bug
Online Configurator: Using the firmware from this source my keypresses only register on the left board and not the right board. I tried with my custom layout and the default layo…
-
#include
#include
#include
void setup()
{
Serial.begin ( 115200 );
Serial.println ( "eye" );
debug_init ();
}
gives verify error:
Verifying...
HardwareSerial0.cp…
-
Hello.
I tried to compile Katiana bootloader with LUFA 170418 and avr-gcc 7.3.0 in Cygwin, but it fails with these errors:
```
In file included from Katiana.c:106:0:
Katiana.h:239:37: error: exp…
-
I use:
- MPLAB X IDE v6.20
- MPLAB XC8 v2.46
- AVR-Dx_DFP v2.4.286
After "Clean and Build":
In file included from mcc_generated_files/uart/src/../../system/system.h:43:0,
from…
-
Considering all the issues regarding timing constraints that were previously reported, is there any intention to move on to e.g. STM32 instead of AVR8? We would get 20MHz->32MHz, SRAM 8KB->20KB at the…
-
Given all the changes I've made to Bloom's TDF format and the way TDFs are handled, we can now easily present a list of all supported targets and their respective configuration values, in a machine re…
-
My settings.json file:
{
"makefile.makePath": "C:\\msys\\1.0\\bin\\make",
"terminal.integrated.defaultProfile.windows": "Command Prompt",
"terminal.integrated.env.windows": {
…
-
마지막에
$ make all -f Makefile.atmega32u4 KEYMAP=han106
입력후 아래와 같은 에러가 발생했습니다.
collect2: error: ld returned 1 exit status
make: *** [../../tmk_core/rules.mk:556: ibmpc_usb_atmega32u4.elf] Error…