-
Hello and welcome.
I have a BMS as in the topic and it works with seplos ver2.0, but not everything is decoded correctly. Send data:
~25014642E00201FD30
answer:
~25014F4280800001 0E 0DD2 0DD2 0DD3…
-
-
The Bluetooth still works but the BMS has lost its identifier so can’t be switched on. Hate not being able to fix something that appears so simple. Could be as simple as UART reprogramming but I don’t…
-
Enhancement request: show total capacity and predicted usable capacity.
The board quits when any one cell gets down to 3 V. When there is a cell voltage imbalance, this can happen well above 0% (m…
-
Hallo,
Ich suche nach einem Adapter, um mehrere auf dem BMS-Controller TI BQ76940 basierenden China-BMS (Batterie-Management-System) über Bluetooth auszulesen.
Ich verwende einige dieser BMS (als 14…
-
I originally added this to an existing issue but believe it warrants more visibility. In addition to the existing Android 12 and security patch problems reported in other issues, we need to determine…
-
Board: WiPy 2.0
Firmware: 1.20.2.rc7
I'm trying to read data from a battery management system. This has a TX characteristic where one can write commands to it and a RX where the client gets the an…
-
very interesting project, whould be great if you can add a partlist & schematic / wiring diagram
// J
ghost updated
7 years ago
-
@raspiduino Can you provide a bit more documentation of the source code in this repo?
I'm particularly interested in the communication with the bms.
Which hardware do you use to connect to it?
-
# Decoding the Smart BMS Protocol | Jake’s Blog
Smart (meaning with UART / Bluetooth interface) battery management systems are widely available from china now. Almost all of them use a generic protoc…