-
### Info
Platform: ESP32 (M5Stack Core2)
ESP-IDF: 5.1.4
Arduino ESP32: 3.0.6
Connected Hardware: BME280 Environment Sensor on GPIO pins 21 and 22 using [https://github.com/adafruit/Adafruit_BME280…
-
Hi,
Thank you for making this, Installers just put in a Lossnay system in my house with a ducted system but they only hooked it up to power. So really it is not doing anything! I really think they d…
-
Hi,
I want to use IN100 to read data from BME280 sensor, but my current application expects to receive the data from all 8 registers instead of 6 as it is in the example. I tried to use burst read …
-
Fol…
-
**Describe the bug**
havent read the log yet, its a crash
**To Reproduce**
Steps to reproduce the behavior:
1. it kinda happened after running for a while i havent debugged idk
2. in stem cente…
-
Hi
I tried with much frustration to get this to work.
I was using the web server to -> config -> sensors and choose sensor A as the BME sensor to 280, on bus 77
I was able to check via a python …
-
### The problem
After upgrade to the latest 2022.1.3 all of my bme280 sensors stopped reporting temp, humidity, pressure. Before that on 2021.12.3 everything was working normally
### Which version o…
-
### The problem
Hi, i have one esp32 device that after every ota update losts api connection, if i update that specific device from esp home ui.
it gives error:
"WARNING Can't connect to ESPHome…
-
Hi All
I have sensor mounted directly on board but get no readings
and it lo…
-
- Noseover Speed (ft/s) - default 0
- Drogue Method (Height or Delay)
- Drogue Height AGL - default 1,500ft
- Drogue Second Delay - default ?
- Drogue Sensor Mixing (BME280, MS5611) - default OR…