-
Sorry if this is the wrong repo to be asking this question. I have a few boards with the CH32 chips. My reset circuit works fine for the v003 chips, but doesn't work for the X03x chips. I am wondering…
-
Hi,
I'm new to the CH32x035. I made a pcb for testing purposes and I'm wondering, how to program it using it's USB interface. The datasheet says: "Built-in 3328B System memory (Bootloader) for storin…
-
As the title says, it seems like my WCH-LinkE is not recognized by openocd.
openocd output:
```
Open On-Chip Debugger 0.11.0+dev-02415-gfad123a16-dirty (2023-02-22-15:09)
Licensed under GNU GPL v2…
-
Need SPI,I2C_Master, Easy ADC on CH32V003
-
I've come across a part whose bootloader has a VID of `1a86` instead of `4348` which is WCH's other VID. When I modify the `src/transport/usb.rs` to match `1a86` instead, it does show up. Has anyone e…
-
Poorly documented but the CH32X035 also has a USB bootloader and wchisp seems to work:
```
% sudo ~/.cargo/bin/wchisp --verbose info
22:38:12 [DEBUG] (1) wchisp::transport::usb: Found USB Device …
-
感谢大佬提供这个资源,我正在用winform开发个上位机,导入了大佬的资源之后,调用
`UInt32 EnumDev([Out] CHISPDeviceInfo[] IspDevInfor, Byte MaxDevCnt, out Byte BtChipSeries, out Byte BtChipType, out Int32 IsPreBTV230);
`
MaxDevCnt传入16,可…
-
I am using the CH32V00x configuration when compiling. Programming goes fine. Log:
```
Info : WCH-LinkE mode:RV version 2.12
Info : wlink_init ok
Info : clock speed 6000 kHz
Info : [wch_riscv.cp…
-
Hi,
After installing for VSCode as per instructions I was able to build but not flash firmware (noneos-sdk) because of libusb not being found. This despite having both Homebrew and MacPorts instanc…
-
Can make custom template noneos-sdk on new project ?
i need make custom template on new project have some file and function
not have int main(){ } only ?