-
Can we have a working comware 7 napalm driver here?
-
I'm using `get_mac_address_table()` on several comware-switches running version 7.1.070. Since two days, I'm not able to pull the mac-addresses from a single switch called `SW01_A-Sued` due to the net…
-
### The problem
For all of our Huawei VRP fleet the light level limits on transceivers are not set at all or set to bogus values (i.e. upper limit of -60 dBm) during discovery and thus errorneously a…
-
hi ktbyers:
i login device with hp_comware and redispatch with cisco_iso_telnet(i execute 'telnet IP' command to jump other device , they not the same prompt ), but it raise an readtimeout. i …
-
Hi there,
I have a switch stack of S5820X devices which should be compatible with the S5500 series of devices.
Running a simple `.get_facts()` on the system results in a UnicodeDecodeError with …
-
## Describe the bug
`Downtime` objects are not removed properly when the owner still exists although the `Downtime` itself is obsolete.
The error in the log looks like this:
```
2024-10-18 16:…
-
Hello guys,
I have some HP switches on my network, LLDP is active in all switches.
My topology is as follows:
My Core Network is two HP 5130 switch in IRF, the 5130 is a comware 7 switch. My edge…
-
I am adding functionality for HPE Comware switches. However, as VLAN configuration mixes multiple vlans into the same configuration statement things are getting a bit complicated. I have written a pre…
-
**ENV:**
check_nwc_health-7.6/
H3C5120:
H3C Comware Software, Version 7.1.070, Release 6126P20
**Error msg:**
root@marco:~/check_nwc_health-7.6/plugins-scripts# ./check_nwc_health -v --mode ha…
-
[Python求助.docx](https://github.com/sshuangliu/auto_config_get/files/9966476/Python.docx)
跑完以后没有结果。能帮忙看一下吗