-
Hello
The sd-card of my controllino does not work anymore.
Is there a chance to get a software image for the controllino hotspot so I can write the image to a new sd-card?
Any hints are appreciat…
-
I am using a Seneca Z-8NTC to readout NTC's resistors.
I have seen that underneath commands:
// Read 16 registers starting at 74)
waitPeriod = millis();
result = Modbus1.readHolding…
-
What value should I enter the variant?
I tried COMP-CONTROLLINO but it doesn't work
-
Controllino MEGA. IDE 1.8.10
Just setting up the Controllino to sync the RTC with a NTP source. Downloaded a simple NTP example sketch and the system reported the correct time. Integrated it wit…
-
We now have various balena OpenFleets on balenaHub:
- RAK - https://hub.balena.io/nebraltd/helium-rak
- Helium OG - https://hub.balena.io/nebraltd/helium-og
- Sensecap - https://hub.balena.io/neb…
-
Hi,
Thanks for a great project.
I am trying to build a chlorine controller with a Controllino Maxi with the Poolmaster SW.
At start the ORP and chlorine pump relays are all turned on and I have t…
-
What kind of issue is this?
- [X] **PlatformIO Core**.
If you’ve found a bug, please provide an information below.
------------------------------------------------------------------
##…
-
Hello,
I am relatively new to Arduino and my C++ knowledge is a bit rusty so please excuse if i'm wrong with my post.
There seems to be a memory allocation problem with strings in combination with …
-
The **boards.txt** file allows the following syntax
`pinoccio.build.core=arduino:arduino`
to reference a core e.g. from the main Arduino SDK (see [this](https://github.com/arduino/Arduino/wiki/Ardui…
-
Hello,
there is know W5100 erratum which causes that socket.cpp -> EthernetClass::socketSendUDP() never returns. It happens during asynchronous bi-directional UDP communication when one packet is b…