-
This is wrt eMote .NOW v. 11.2. One program (call it Sender) periodically generates CSMA messages whose payload consists of an ascending counter value. The other (call it Receiver) is a radio signal m…
-
The request comes from the WWF project folks.
Currently we have a liveliness parameter (which is a time delay) which is configurable from the dll, but the beaconing interval is set in (native) source …
-
eMote v63, .NOW
Under CSMA on the .NOW the neighbor list is never populated. The same program under OMAC behaves as expected. Attached is a sample program. You can specify the protocol at the top o…
-
hi:
I try your code,but i have some problem with "cd ~/hmac/ath9k-hmac/hmac_userspace_daemon; make;"
when i make have lots of problems :
grant@grant-Aspire-4743:~/hmac/ath9k-hmac/hmac_usersp…
-
**Outline:** When I try to run the rpl-udp client and server example from Contiki-NG, the client node continuously exits from the RPL network because it is unable to find a parent.
**Contiki-NG ver…
-
This is related to the test I am performing in #1165.
I have found that when using ContikiMAC with RIME (I think this may also apply to other network stack configurations), if I try to queue up packe…
-
Tuscarora has methods SendData and BroadcastData. In CSMA we have Send; Broadcast is a Send with a special address of MAC.AddressType.BROADCAST (65535). In OMAC we only have Send.
Suppose we need to…
-
To prevent on air packet collisions, simple CSMA can be implemented like in AX.25 TNCs
http://www.ax25.net/kiss.aspx
The libAPRS turns a pin high when receiving data, which can be used to check if…
-
# Problem description
I am trying to get a network up with csma and link-layer security on the cc1310 and am facing some problems on getting it to work with the rpl border router.
The nodes are …
-
In the CSMA code at present, an attempt to set the Tx power can fail if the radio is sleeping or if it is receiving a packet. Instead, I suggest that the method be changed so that it merely stores the…