-
- [x] I am running the latest version of this repository (dependencies too)
- [x] I checked the documentation and found no answer
- [x] I checked to make sure that this issue has not already been cr…
-
Dear fellows,
I have the T-SIMCAM OV2640 and the SIM7600G-H, which has the TP4056 battery charger, this charger only has a blue LED, I've seen other TP4056 that has a green and red a LED to know if…
-
PCB
- [x] Battery compartment
- [x] Latching startup and deepsleep
- [x] ESP32 / ESP8266
- [x] 12 LEDS
- [x] Switch at the bottom
- [ ] Lipo Charge possibility
- [ ] Charging port
- [ ] Moun…
besi updated
11 hours ago
-
# Description
Implement deepsleep for better energy efficiency
# Acceptance Criteria
- [ ] Code checks sensor readings every 15 minutes
- [ ] The controller goes into deep sleep in between
-
Hi,
Not very knowledgeable about any of this so I preferred to ask. Recently Infinitie managed to get more than 10 day of battery life which is dramatically longer than what we can currently get ou…
-
With P2P enabled, I get time drift. (at least 15 seconds)
NTP only works as expected.
Only disabling P2P fixes the problem.
Regards Klaus
-
No RTC wake up after deep sleep.
examples/Inkplate6COLOR/Advanced/DeepSleep/Inkplate6COLOR_RTC_Alarm_With_Deep_Sleep/Inkplate6COLOR_RTC_Alarm_With_Deep_Sleep.ino
I am trying to use this example bu…
-
GPIO1 of ESP32-C3 is a RTC GPIO and should be able to wakeup the device from deepsleep mode.
But it seems, in micropython, the GPIO1 is not defined as wakeup.
I want to wake my device using GPIO1. P…
-
Hello again,
if i try use DeepSleep, sometime its work sometime not ....
```
if (0 == strcmp(topic, (const char*) sleep.c_str())) {
val = atoi(msg);
//Serial.printf("i am in IF fo…
-
I tried building the uf2.file because the precompiled version did not work on my Pico W.
picosleep during the evening/night (20.00 - 8.00) makes no difference. Now i have this error on my macOS. I…