-
Hello,
I have question regarding your intentions about extending chan modules for other devices.
Currently you are [compiling chan_dongle](https://github.com/TECH7Fox/asterisk-hass-addons/blob/mai…
-
Hi!
Recently flashed pico-fido 5.12 patched as yubikey 4/5 onto waveshare dongle.
Succesfully tested onto webauthn.io and Yubi's test page, and registered as 2fa device for 1password.
But i cant…
-
### What happened?
I am currently using the latest version of Zigbee2MQTT along with an ESP32-C6 end device running the HA_ON_OFF_light example from Espressif. However, Zigbee2MQTT repeatedly attempt…
-
- Running `cargo nextest run` results in intermittent failure on tests from the `compare_gpu_cpu` or `snapshot` suite when using Vulkan as backend.
- Changing backend to DX12 seemed to fix issue, bu…
-
Recently began using portaudio via P/Invoke. Apparently portaudio attempts to load (and then unload) all ASIO drivers present on a given machine in PaAsio_Initialize(). However, if a driver is fault…
-
**
Good evening, I'm trying to activate midi in the code but every time I compile it gives me the error below:
Without activating midi I can compile it normally
Arduino: 1.8.19 (Windows 10), Pl…
-
This Atlantis Land LinePower works with usbhid-ups
Output from HA:
battery.charge": "99",
"battery.charge.low": "10",
"battery.charge.warning": "20",
"battery.mfr.dat…
-
I've got a Tripp-Lite SmartLCD to provide power to my rack and desk, got the CGI scripts served up on a raspberry pi and noticed in upsstats.cgi that output voltage was 1162.0v instead of 116.2v.
I…
-
### Checklist [README]
- [X] Device is not undervolted nor overclocked
- [X] Device is using the [latest drivers](https://github.com/IGCIT/Intel-GPU-Community-Issue-Tracker-IGCIT/wiki/Intel-driver-up…
-
Procedure:
1) Insmod Kernel Module
`insmod esp32_spi.ko`
2) Wait for ESP Device handshaked success!
3) Remove Kernel Module
`rmmode esp32_spi.ko`
Device Driver hangup at step https://github.c…