-
I have an off brand DHT11 module that I got in a variety pack on amazon. I have tried many different configurations and GPIO pins but cannot get it to read.
I keep getting DHT Sensor not found, che…
-
**What's the full name of the component you'd like to see in Adafruit.io WipperSnapper?**
DHT11/DHT22 temperature/humidty sensor
**What type of component is this (i.e.: Pin, I2C)?**
Pin
**Prod…
-
I tried Thermometer-DHT11-Thingspeak it works properly, but sometimes it reports temperature wrong, for example when room temperature is about 28 sometimes it reports 10 or 12.
-
- Device: **RaspberryPi 4B**
- Sensor: **DHT11**
When running for a long time, errors are reported frequently.
![image](https://user-images.githubusercontent.com/23554202/121394196-ade07800-c983-…
-
Please consider adding a GPIO driver for DHT22/11 temperature and humidity sensors.
-
The DHT11 sensor does not give any values. In this project the DHT12 library is used, but that should not be a problem because it should be downwards compatible, right? What could be the problem?
-
Hi!
It seems that the DHT11 does actually report 1 decimal for temperature (eg: 19.9 °C) as shown here:
https://forum.arduino.cc/index.php?topic=656964.0
Is there any way to obtain the decimal …
-
#1
-
### Script Command
```shell
import time
import adafruit_dht
import board
dht_device = adafruit_dht.DHT11(board.D4)
temperature_c = dht_device.temperature
temperature_f = temperature_c * (…
-
As for now, this device use the generic case.
DHT11 sensor must not be enclosed inside the case to avoid reporting higher temperature.