-
I'm probably doing something wrong, but I don't know what.
System: Kernel: 5.4.0-120-generic x86_64 bits: 64 compiler: gcc v: 9.4.0
Desktop: Cinnamon 5.2.7 wm: muffin dm: LightDM Di…
-
Hi there,
I have what I believe is one of the banggood kits. I did successfully flash this firmware a while ago, I can't quite remember what settings though.
Recently I fried the µ-controller whil…
-
i like to have a hourly chime in my clock but not so annoying as in original firmware, just a short beep. also i like functionality and logic of your firmware. so here is the patch for hourly chime su…
-
just updated to latest master and it seems there is a new option which pads writes out..
My code usage is almost the full space of 4k, so when I write, this is now attempting to pad out to 4096 bytes …
-
I have a model with the stc15w404as. according to the schematic for my clock here: http://www.diyleyuan.com/jc/1/01-1.html
the buttons should be on the the 3.0 and 3.1.
Also, I can't find any …
-
There are some more advanced things im trying to do with my project which don't seem to be working
E.g.,
for one of my projects, I have some very special (don't ask why ;) CFLAGS and LINKFLAGS, wh…
-
```
[Tue Jun 19 23:16:03 2018] Processing stc15w408as (platform: https://github.com/platformio/platform-mcs51.git; board: stc15w408as)
---------------------------------------------------------------…
-
Hoping you have some pointers for me here. I'm using the DIY kit that uses the STC 15F204EA chip and I'm using Adafruit's FTDI Friend cable in its default configuration which simply emulates a USB-to…
-
noticing when I use protocol=auto, that it does not seem to work with stc15f204ea, but if I specify protocol stc15a, it will work.
```
jens@spire:~/build/stc_diyclock$ stcgal/stcgal.py -p /dev/tty…
-
I see some bits in the code that mention the 404 but how do I specify it to write the eeprom? I flashed your precompiled main.hex and I'm flashing 1f:7f