-
I believe it should be using the Serial USB plugin.
Can someone explain how I can configure OLA to fix this?
-
IMO one the biggest challenges to getting RS up and running appears to be the OLA Plugins.
I request changing the default enabled OLA Plugins to support FTDI USB DMX interfaces.
Maybe have a radio…
-
Is there a list of supported DMX interfaces?
I have a DMXIS usb interface and it's recognized by OLA but I'm having issues with it communicating with my Chauvet Gigbar2 in the 23 channel mode. The …
-
**Describe the bug**
Single channel in QLC operates on three physical fixtures
**To Reproduce**
Steps to reproduce the behavior:
1. Connect a WS2811 LED strip
2. Add fixture Generic RGB
3. Go …
-
**NOTE:** IF YOU DO NOT ATTACH YOUR LOG FILES, THEN THERE IS A HIGHER PROBABILITY THE ISSUE WON'T BE RESOLVED. (Steps at end)
# Please answer the following:
**FPP Version and Hardware**:
Example…
-
In my application I need to handle DMX input using sources that may send less than 512 channels. The issue is that I don't know how many channels are sent, a user can connect any source, so I need to …
-
**Environment**
- OS: Linux (tested on Ubuntu 20.04 & Mint 20.3)
- Version **All versions since 1.9.3b1** (1.9.2 stable does not have the problem)
- Serial ports tested: integrated RS232, USB se…
-
Hello.
Trying to make TTY Line Discipline pretending like UsbPro.
done write() and read(), works fine on manual test (echo >tty, cat tty)
Installed OLA then, IT HAS DETECTED device once, and ne…
-
I was debugging some issues with my Arduino library and ran into something that doesn't match the Enttec spec. When I have my device as either emulating an DMXKing ultraDMX Micro or my DMXUSB device, …
-
I'm trying to run the simple and fastled example with a wemos D1 mini without any succes.
I changed the pinout to be able to drive the LED_INBUILT or pin D2 for the fastled but no response at all fro…