-
Hello. Can you add this item to the Fritzing library, please?
https://www.adafruit.com/product/2240
-
apa102 module is not available in firmware.
Uploading a generic Dotstar driver (https://github.com/RobertJBabb/micropython_generic_apa102/blob/master/generic_dotstar.py) allows the LED to be access…
-
I'm trying to extend nanpy by supporting Adafruit's DotStar LED strips and I'm running into a serial timeout when I'm trying to create an instance of the DotStar object I added.
I followed the inst…
-
The Newstar **NS107S** And Rose Lighting **HD107S** has a 26+Khz refresh rate and up to 30 Mhz Data rate. Important for POV imaging projects. (APA102 driver compatible)
The HD107S is more common on …
-
I think I have found a problem in the TinyPICO setup. This may not be the correct place to report it but it seems better than nothing.
I'm using:
* macOS 10.14.6
* Arduino 1.8.12
* esp32 1.0.4…
-
I have assembled a six-panel DotStar Matrix and, while it works, I'm having trouble getting certain colors to show up when using HSV. Some basic colors show as expected (red, white) but others do not …
-
Hi there, currently using your led-effects plugin with great success for two sets of dotstar runs. I asked this over at led-control with no answer, but wanted to see if you had any insight by chance.…
-
- Arduino board: Adafruit Trinket M0
- Arduino IDE version (found in Arduino -> About Arduino menu): 2.0.1 (Also saw the issue on the legacy IDE)
**Please note this seems to be slightly intermi…
-
**Describe the bug**
As soon as any code is written for the Gemma M0 which uses the light blocks to set RGB LEDs then an external 4 wire DotStar LED strip will be added in the simulator and wired up …
-
### CircuitPython version
```python
Adafruit CircuitPython 7.3.3 on 2022-11-26; on Raspberry Pi 4 b
```
### Code/REPL
```python
# SPDX-FileCopyrightText: 2017 Limor Fried for Adafruit Industries
…