-
`>>> rtc.read_datetime()`
Traceback (most recent call last):
File "", line 1, in
File "/usr/local/lib/python3.4/dist-packages/pyRPiRTC-0.0.2-py3.4.egg/pyRPiRTC.py", line 151, in read_datetime
…
-
I have been trying to set-up my DS1302 module this evening. I used the example `set_clock.ino` and connected the pins as shown in the diagram to the arduino. I also changed the date/time in the code o…
-
Temperature and ligth measurement are working. Display is OK. Button 1 and 2 are working.
Time setting and display is not working. There is a 1F 7F constant display instead of time.
![time_displ…
-
* 최대한 적은 포트 사용
-
i use ds1302_set_utc to set the datetime, usually get the message:
**unable to set RTC time**
so i checked the code, found this clause cannot fullfill
-2 < (dt_write - dt_read).total_seconds() <…
yyw04 updated
4 years ago
-
[SKU593344 光控工控YD010(英文).docx](https://github.com/zerog2k/stc_diyclock/files/1858988/SKU593344.YD010.docx)
I've one of this could you please tell me if it's supported?
Bought here:
https://it…
-
```
Looks like lots of function are identical for DS1307, MCP 794X and PCF 8563.
i2c device address is different and MCP series has some additional functions
like storing the power failure and resum…
-
```
What steps will reproduce the problem?
Enhancement to Goterm/GoMuxTerm for time support:
The request is for the PC side Go language support
Some command (E.G. ctl^T) issued in the terminal sess…
-
```
Looks like lots of function are identical for DS1307, MCP 794X and PCF 8563.
i2c device address is different and MCP series has some additional functions
like storing the power failure and resum…
-
```
Looks like lots of function are identical for DS1307, MCP 794X and PCF 8563.
i2c device address is different and MCP series has some additional functions
like storing the power failure and resum…