-
Hi @gfto and @lars18th,
Your code is working a treat and like to contribute as I see your code valuable in the DVB transport arena.
Most of all the software based Realtime muxers are closed source…
-
implement in the DVB-I client the Device discovery protocol as specified in DVB-NIP A180r1.1 bluebook, chapter 11.1.2.
The DVB-I client shall enable this feature at any time to discover potential N…
-
Hello all and @lelegard,
I’m back with another TSduck-related query, which might have been covered before, but after scanning past issues, I think my question is somewhat unique. Additionally, the …
-
Did some tests with an rtlsdr:
I made some attempts to install and use one of my dongles (RTL2838U) on the FLX1:
1. I started by installing the typical rtlsdr stuff: libusb-1.0-0-dev, and rtl-s…
-
It seems that the kernel config being used, is disabling all of dvb subsystem. This is not great for tuner cards.
Thus I'm requesting it to be enabled.
My tuner card is https://www.linuxtv.org/wik…
-
Hi, I use Astrometa DVB-T2, https://www.linuxtv.org/wiki/index.php/Astrometa_DVB-T2
I don't have problem when I use direct for example with tvheadend. But when I use minisatip i see only one fronten…
-
## Background
TR 103972 v1.1.1 Section 6.3.3.2 describes the service discovery procedure that a DVB-I client uses to discover the set of available DVB-I services. This realizes the M8d service announ…
-
I'm not able to get the LibreSDR to grab a DHCP IP when I plugin a ethernet cable into my network, is there a setting I need to change to enable the ethernet jack?
BTW, I can access the LibreSDR o…
-
The commercial requirement for V&V of the Signalling of Applications for Accessibility Services states
>**Req 4.4-2 DVB-I metadata**
DVB-I service list and content guide metadata shall …
-
Hi, I'm trying to build the project using a **Raspberry Pi 5** with **Raspberry Pi OS (64-bit)** but I'm getting some errors.
There are a lot of errors that look like this:
```
dvb/dvbsenco8.s:2:…