-
Hi,
Currently, I'm trying to use tsduck to stream over IP the full TS received by an USB DVB-S tuner. However, the output is not stable most of the time I don't see any signal.
I'm using the foll…
-
### What happened?
I used snapd and installed Tvheadend, then ran the Wizard to completion. Then subsequent login attempts were denied for both the administrator and user accounts.
In another thre…
-
Hi,
In GTMedia GTC there is a possibility to write directly do channel database, with no need to export/import xml files.
This could be done with Android ADB commands over wifi connection.
GTMedia …
-
Hello again.
Sorry if I bather you.
I'm not well skilled in development and Linux scripting.
I have one OUTPUT ts file either as fifo ts or even as nc output file.
This TS content has 10 or maybe more…
-
If I first turn on the TBS 5930 connected to the Rock 3 board and then turn on the board, then an error appears during the board boot. But if I turn on the TBS 5930 and connect to the Rock 3 board whe…
-
it is not possible to have proper tv setup when "usb dvb-*" device correctly installed together with sat>ip client enabled for network sat>ip server
-
Hello,
I have a problem with the correct operation of your program and the tevii662 tuner. It does not tune the frequency. The problem occurs on various platforms. Vlc also does not work.
[ …
-
Hello All,
Can you please advise if we can use TSDuck (TSP, MPE, File,...) to embed data (HLS video streams, Pdf, Bin, Docx, Jpg,...) to be sent as DVB protcol.
We manage to generate an MPEG-TS file…
-
Hi, I have a script that runs ok for simple modulation but it seems unstable after a while audio distortion frames flicking back and forth a bit. Is there a reference for udp -> dektec (DVB-T) and ide…
-
I'm using Satpi with Zerotier.
I have modified init.d script with --iface-name forcing Zerotier interface use.
It works almost fine but there is a problem when booting as Zerotier uses a software …