-
```
The internet key Huawei E220 not connect automatically. For connection plug
and unplug the key till connection.
tks
Pasquale
```
Original issue reported on code.google.com by `pasquale...@gm…
-
Hi - I've got a raspberry pi connected to a Huwai E220. On reboot or restart of gammu-smsd messages send OK but after an hour or so the daemon stops communicating with the modem. This is with the stoc…
-
My program has been working and suddenly stopped. The cause is updating ESP32 board manager from 2.017 to 3.0.0 on Arduino IDE 2.32.
Since new ESP32 board manager is based on ESP-IDF v5 and I know a…
-
Hello everyone, I'm using this library to employ several Lora devices, in this case the e220-400t22d.
However in several raspberry pico's, such as raspberry Pico x8, waveshare rp2040 plus X2 and ev…
-
**Describe the bug**
There is a consistent error on the website.
**To Reproduce**
Visit the main documentation website.
**Expected behavior**
Not break.
-
My system works with E220-400M22S and E220-400MM22S on various controllers like STM32F7, ESP32 with LoRaRF Arduino library.
I am able to receive and transmitt.
Trying to make it work with RPi with n…
-
Description
It appears that the markdown headers for blog posts are not formatted correctly when updated through PagesCMS. The headers are formatted as strings, but the correct formatting should look…
-
I have a landis gyr e220 power-meter that sends binary data over IR which I learned is SML protocol. I thought this project could do the decode but I can't see how to use it.
The example doesn't run …
-
I tried to set different UART_BPS rates. It works fine as long as the UART_BPS is not greater than 9600 Baud rate! Do I miss something here?
| TTL UART baud rate(bps) | Constant value |
| -- | -- …
-
Salut! I've added our updated offline Filipino dictionary to "None: Day 1-Segment 1". I noticed, however, that words with an apostrophe, are not given Word Hints.
I hope you'll guide me in …