-
Add support for EEPROM saving/loading
agg23 updated
3 months ago
-
The PCF8563_RTC will not compile in the arduino IDE,
Around line 270 in the pcf8563.cpp the following code exists.
void PCF8563Class::initialize (void)
{
INTERNAL_EEPROM_PORT.begin();
…
-
Say I have a printer and I want to change the physical hardware of the machine to have a larger print area.
an example would be to convert the machine and give it 15mm thick 1200mm long linear rails …
-
I'm using the following product: https://shop.pimoroni.com/products/inky-impression-4?variant=39599238807635
And running inky v1.5.0 on python 3.11.2 on a raspberry pi 4
I get the following erro…
-
I am getting the following in the terminal when attempting to flash a P8X32A-D40.
```
proploader.mac -k -D baud-rate=115200 -p /dev/cu.usbserial-P97z9aa5 "~/pixelmusic3000e.binary" -e
Opening fil…
k6lcm updated
3 months ago
-
V1.2.0 pre
Uploading a new firmware clears the eeprom
When uploading a new firmware. This clears anything that was stored in the the eeprom (saved rhythms, sensitivity settings etc... )
In th…
-
Hi,
We are trying to use the `ftconf.py` script for changing the serial number, the manufacturer name and the product name of the FTDI 232R chip mounted on a breakout board.
The script runs with…
-
### Describe the bug
My distro just upgraded to kernel-6.11 and since liquidctl crashes . I have a nzxt cooler device.
### Commands executed
$ liquidctl list
OSError: [Errno 6] No such device …
-
**Describe the bug**
Board CI failing, see: https://github.com/zephyrproject-rtos/zephyr/actions/runs/11322012174/job/31482120728?pr=78621
**Expected behavior**
Board to work
**Impact**
Shows…
-
First off, let me just express my appreciation for the work you've put into this.
Secondly, I thought the following might be a helpful addition for those like myself, who are still using the ikea …