-
I'm sure [your SPI programmer](https://trmm.net/SPI) works great, but for those who do not happen to have a teensy on hand and would end up buying some hardware to flash things anyway, I would recomme…
-
I currently have Version 7.0 Build 1866 firmware running on my Dimension 1200es (firmware circa 2007). I see that the latest available firmware is Version 10.1 Build 3810 (firmware circa the past ~2 y…
-
I do own two similar Xiaomi Mi Router 4A Gigabit Edition v1 and I do not know
why one of the routers both of the radios (5ac and 2.4n) works fine and the TX power could reach upto 20dbm.
But the o…
-
FreeJoy firmware freezing after aprox. 10s of workig on an STM32 with 256 kB Flash memory.
Programmer reports this CPU as Revision Z, ID 0x414. Maybe is there some issue with emulation of EEPROM?
-
## Using Linux to verify ability to update
### latest firmware is 1.92 but the docs are not working as written.
_dfu programmer 0.6.1_ was installed by using synaptic default repositories
```
$ dfu…
-
Hello!
Those -l and -o options, are not optional!
` File "/home/esalgado/Downloads/AT28C-EEPROM-Programmer-Arduino/at28c_programmer.py", line 84, in main
str(addr - args.offset[0]) + " / "…
-
```
Hi, I made a small patch that allows exporting EEPROM to intel hex file and
that flashing it with usbasp programmer. It may be helpfull for those who
doesn't have FTDI cable or have some problem…
-
```
Hi, I made a small patch that allows exporting EEPROM to intel hex file and
that flashing it with usbasp programmer. It may be helpfull for those who
doesn't have FTDI cable or have some problem…
-
```
Hi, I made a small patch that allows exporting EEPROM to intel hex file and
that flashing it with usbasp programmer. It may be helpfull for those who
doesn't have FTDI cable or have some problem…
-
```
Hi, I made a small patch that allows exporting EEPROM to intel hex file and
that flashing it with usbasp programmer. It may be helpfull for those who
doesn't have FTDI cable or have some problem…