-
![image](https://user-images.githubusercontent.com/12049360/44626938-f5f29500-a925-11e8-8f2d-6209edef42ad.png)
source
https://github.com/nicolasdb/nicolasdb.github.io/issues/81
-
Hi I am unable to connect my controller to bCNC. I open the serial port but the status stay on Not connected with the orange background. It also said Connection is establish with Grbl, see screen shot…
-
Hi, I am having trouble connecting a small laser engraver to LaserWeb. It will connect for around 5 seconds and then say no supported firmware detected and disconnect itself. I have read some previous…
-
Hi,
Is your project compatible with the EleksTube IPS Pro ?
https://fr.aliexpress.com/item/1005004836024662.html
Do you know if this product has the problem with the 5V power ?
Best Regards,
-
Hi, and thanks for sharing your work !
I was gifted a [Chinese copy of the EleksTube](https://www.ipstube.com/en/product/IPStube-401.html), and decided to see if I could reverse-engineer it. Doing …
-
Hi, is this working with Gen2.1 also or do i need to change something?
Looks like the pinout changed but i don't know how to get it. The boards now hosts a ESP32-Pico-D4
Thanks,
Tom
-
Thanks @SmittyHalibut for this amazing job.
I'm planning to port this one using visual studio code and platformio so end user can build easily getting rid of checking all library version in arduin…
-
My clock is a SI HAI - i try to upload new digits and clock run on boot loop
i find you repository and try to firmware - BUILD_SI_HAI_20220224.bin but after restart i see
setup...
WIFI start
WPS …
-
Hi everybody.
I have replaced an eleksmana SE with a DLC32 V2.1.003. Everything works fine but the laser. I tried a lot of things from other subjects in the forum and posts on internet but nothing …
-
Hello
Recently i bought the MKS-DLC32 v.2.1 and the TMC2209 stepper drivers.
My goal is to connect 2 stepper motors to the Y Axis but they must work opposite.
Is this possible and if yes how can …