-
Embedded-hal has hit a RC and is looking for final feedback. It may be worth starting to port the stm32 crates to help locate any flaws.
See https://github.com/rust-embedded/embedded-hal/issues/177…
-
Added `embedded-hal-bus = "0.2.0"` to my project and it failed to build.
Using target `thumbv7m-none-eabi` works, using target `thumbv6m-none-eabi` fails. Version 0.1.0 works.
Trying to build the …
-
Changing the SPI frequency essentially goes to https://github.com/esp-rs/esp-hal/blob/a20054c90cacaf9ab20b28d44ec1c677c5ea552e/esp-hal/src/spi/master.rs#L2576
which is a loop-based search. However …
-
I am using @bugadani 's `ehal1` fork of `ssd1306` to make some examples work with `embedded-hal-1.0.0`. One of my main problems has been using `ssd1306` with `shared-bus`. (see https://github.com/s…
-
embedded_hal recently had it's 1.0 release. Every crate is adopting it finally and since i am using esp-idf-hal (which has already been upgraded) i cannot use this crate with it yet.
-
I'm looking at the code but fail to understand why the embedded Hal interfaces are implemented for CanSocket but not CanFdSocket?
Can anyone shed some light onto the matter?
-
This issue was migrated from GitLab. The original issue can be found here:
https://gitlab.com/susurrus/serialport-rs/-/issues/71
---
It would be awesome if `serialport` would add opt-in support for th…
-
Despite it being stated that the `async` feature "enables embedded-hal-async support", there is no code implementation of this. Async shared busses would be very useful, especially for crates which on…
-
Could this crate be updated to support the current `embedded_hal-1.0.0` alphas? There's also a new `SpiDevice` interface that would allow a safer implementation of a shared bus using dedicated CS pins…
-
https://github.com/rust-embedded-community/embedded-sdmmc-rs/blob/710bd34253d453de4045c7307d1d286ccc1972ed/src/sdcard/mod.rs#L61-L67
If you take a CS pin directly, you have to use SpiBus, not SpiDe…