-
### What happened?
I have Armbian installed on EMMC card and Armbian can be booted from EMMC.
I have another EMMC card in SD-card slot, but it does not work.
Here is the dmesg:
```
[ 3.78861…
-
### Describe the bug
the only ipq807x devices with emmc are:
- prpl haze
- qnap 301w
- spectrum sax1v1k
- zyxel nbg7815
during sysupgrade the loop device within rootfs is created at the wron…
-
hi, i see in your code "TODO: Possible bug with bs > 4GB" i need to dump full emmc from mine lumia 2520 that have 32Gb. For now i can copy to usb just 4gb
-
I have sucessfully used SD Cards with the Portenta.
However I cant get it to work with eMMC Modules. I use a custom Board for this.
the relevant code is in BSP.c
With the HAL_SD functions I get err…
cl0rm updated
2 months ago
-
I installed the latest Armbian Bookworm on the CB1 eMMC but without luck so far.
Maybe i will have to add the BoardEnv.txt with fdtfile set to sun50i-h616-biqu-emmc?
It would be great to either to…
-
What should I select in this section to install Radxa Zero 3W Android (Emmc).
thnks
-
When flash a partition with 'sparse="true"' flag, no error returned.
But device can't boot up successfully and it reports corresponding partition mount failed.
According to the Windows tool, it has…
-
Hi , Thanks for your work
I just wana to ask if its possible to run opnsesne along with UEFI Boot on EMMC ? i mean flash EMMC with both images ?
As i can see on your post , https://yrzr.tk/run…
-
Hello,
I changed the RV1106 EMMC to 32GB from 8GB, flashed the update.bin it flashed with no problem even flash was also detected.
Started reducing the clock speed of EMMC to be sure if hardware…
-
### What happened?
I was doing some intensive disk activity on my EMMC device (no other disks are connected) when it flipped to read-only mode.
Kernel logging is attached
This seems similar to…