-
Hello to all :)
I have a problem with overshooting very frequent, I tried to change many settings in esphome but without results :/
I have 3 inverters with 1 rs485 bus for to sync them, esp32 mini…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Used Hardware?
Wemos D1 Mini
### What happened?
- go to "/settingsedit"
- settings edit dialog is…
-
In the CLI output it says: "Using the new method of calculating the power demand" (which overshoots by quite a lot).
Is there a way to use the "standard method"?
I found out, that this is in soy…
-
## Do not report new issues related to this message, instead please comment on this issue with the logs that you see and the config for that component.
### The problem
```
[00:00:00][W][compone…
-
Some soyosource inverters doesn't respond to the status request (`0x24 0x00 0x00 0x00 0x00 0x00 0x00 0x00`). The reason is unknown. There is a new hardware version since 2022 (purple mainboard / fw ve…
syssi updated
3 months ago
-
Danfoss Link Gateway or 087H3241 is a companion device for connecting ECL Comfort 110 with Danfoss Link CC. As the name says it acts as a gateway between the RS485 line and 868MHz RF communication.
…
-
### Is your feature request related to a problem? Please describe.
_No response_
### Describe the solution you'd like
Hi, it would make sense to integrate VeDirect to main OpenDTU repository.
But…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Used Hardware?
Wemos D1 Mini
### What happened?
Ha meldet das für einige Entitäten die falsche Einheit verwe…
-
- Development Kit: ESP32-DevKitC clone (also used ESP32S2 SAOLA)
- Kit version: v4 (hardware isn't relavent - both ESP32 and ESP32S2 boards have same issues)
- Module or chip used: ESP32-D0WD…
-
### Issue related to
Sunsynk Home Assistant Add-On
### Describe the issue/bug
Timeout at connection to EW11, see protocol below
EW11 is connected via a splitted RJ45 Cablel to BMS Port
4/…