-
While compiling, using Debian 12, your V13 project for the v3 watch, I stumbled upon the following error:
```
In file included from ~/Lilygo-T-Watch-2020/Liygo-WristWatchESP32-V013/Liygo-WristWatc…
-
### Board
ESP32 Dev Mod
### Device Description
two Esp32 dev modules. using one as transmitter and one as receiver to transmit 6 Variables.
### Hardware Configuration
they are both empty boards …
-
When you enable Long range mode w0.config(protocol=network.MODE_LR) - I am no longer able to see the WiFi beacon of AP from my computer's network scan. Can you please confirm whether you can connect t…
-
## Problem
There is an option in ESP-NOW Kconfig that allows to select a UART for console input (UART0 or UART1). However, if a project disables UART console option (sdkconfig: ESP System settings ->…
-
Hi!
Is ESP-NOW supported now?
-
### CircuitPython version
```python
Adafruit CircuitPython 8.1.0-beta.0-80-g22636e056 on 2023-03-29; Adafruit Feather ESP32-S2 TFT with ESP32S2
```
### Code/REPL
Code and initial testing …
-
It would be helpful not to restart ESP if ESP-NOW could not be initialised.
We have a project that may benefit from ESP-NOW but is not mandatory so it may be ok to fail initialization.
-
Hi
I have note used encryption with my own keys but I read that there is a default key that is used if one is not supplied ?
Do I infer from that that ALL peer to peer communication is encrypted…
-
First of all, thank you for the good work you provide.
This is not an issue in your code, but this is the only I found to contact you, so my apologies for that.
There seems to be a lack of informati…
-
我通过mesh-lite将设备进行组网,并通过mesh-lite-lan-ota进行升级,通过改变APP version控制版本,发现根节点和http服务器的APP version是10,然后mesh第二层app version是9,第三层设备升级后版本依然为9.
int now_version = get_current_version();
esp_err_t ota_finish…