-
Thank you for your project. I want to compile with Windows 11 but I have an error in compilation after 'idf.py build'
`C:/Espressif/frameworks/esp-idf-v5.3.1/esp32-tuntap/firmware/main/main.cpp:35:…
-
In the ESP components registry RadioLib is listed as "supports all targets" but the code only [compiles for a basic esp32](https://github.com/jgromes/RadioLib/blob/c7d6ad3e951300cd37871728e40894fe01ee…
-
[ √] I have read the documentation [Espressif Audio Development Guide](https://docs.espressif.com/projects/esp-adf/en/latest/index.html) and the issue is not addressed there.
[ √] I have updated my A…
-
Compiling a FastLED project with the FASTLED_ALL_PINS_HARDWARE_SPI flag enabled while targeting an ESP32-S2 board results in the following compile error:
`
.pio/libdeps/adafruit_qtpy_esp32s2/FastL…
-
### What happened?
I setup clean installation of the https://github.com/ricardoquesada/esp-idf-arduino-bluepad32-template using VSCode and PlatformIO on a system running Linux Mint 22 Cinnamon.
T…
-
[ √] I have read the documentation [Espressif Audio Development Guide](https://docs.espressif.com/projects/esp-adf/en/latest/index.html) and the issue is not addressed there.
[ √] I have updated my A…
-
```
Errors (ran nothing, 0 tests, 0 ran, 0 checks, 0 ignored, 0 filtered out, 0 ms)
Note: test run failed because no tests were run or ignored. Assuming something went wrong. This often happens beca…
-
### The problem
The Integration is failing to setup
### What version of Home Assistant Core has the issue?
core-2024.11.3
### What was the last working version of Home Assistant Core?
_No respons…
-
### Board
WT-ETH01
### Device Description
This is a regular esp32 with an ethernet-port bolted on.
### Hardware Configuration
There's an SD-Card reader attached to pins
```
#define …
-
## Environment
- Audio development kit: |ESP32-S3-Korvo-2|ESP32-S3-Korvo-2-LCD
- Audio kit version ESP32-S3-Korvo-2: v3
- [Required] Module or chip used: [ESP32-S3-WROOM-1]
- [Required] …