-
Currently this sensor is supported by esp-idf-sys but there is no higher level wrapper, it would be great to have one!
-
Hello, building the example blink sketch on a loin esp32-s2 does not work anymore upgrading to ESP32 core 3.0.1 and fasteld 3.7
the errors are the following:
/Users/marco/Nextcloud-marco/Arduino…
-
The ESP32-S2 is mostly a replacement for ESP8266, but not supported.
Please add support.
-
Hello all who may find this.
After obtaining the code provided in the other issue - https://github.com/Mottramlabs/ESP32-4-Channel-Mains-Current-Sensor/issues/1
I noticed that the ADC provided w…
-
Crash with ESP32 S2 mini.
(Code is running on ESP32)
Someone have test on ESP32 S2 ?
Any idea how to solve that ?
-
I ordered an esp32-s2 without thinking much about it but after not being able to flash the chip at all I transfered another "S2" from a dev board. That fixed the issue for me.
Out of curiostiy I mo…
Quas7 updated
1 month ago
-
SPI constructors sets 4W HW pins: clock=*/ 18, /* data=*/ 23
ESP32 S2 pins
clock = 36(sck), data (mosi) 35
-
The [Huidu HD-WF2](https://www.huidu.cn/product_131.html) is a cheap LED Matrix controller card (with 2 HUB75E ports, labeled X1 and X2) based on an 8MB ESP32-S3, a [Datasheet](https://huidu-cn.oss-ap…
-
Would it be possible to make this library work with the ESP32 S2 and S3? Both support native USB.
Thanks
jhsa updated
2 months ago
-
Using an Adafruit QTPy ESP32-S2 and Arduino IDE 2.0.0,
DS18B20 non-parasitic, wired with 4.7K pull up on DQ
Compiles & uploads fine but just keep getting the `No more addresses.` message over & over…