-
https://a.aliexpress.com/_Evoxbs7
This board is suport by https://github.com/BitMaker-hub/NerdMiner_v2?
Wich bin should pick.
When boot say always image can not load.
Thanks
-
How do I run this on an ESP32-S3?
-
### CircuitPython version
```python
1) Adafruit CircuitPython 9.0.5 on 2024-05-22; Waveshare ESP32-S3-Zero with ESP32S3
2) Adafruit CircuitPython 9.1.0-beta.3 on 2024-05-22; Waveshare ESP32-S3-Zero …
-
### Target name(s)
ESP32-S3-DevkitC1
### Firmware version
ESP32_S3-1.9.1.151.zip or ESP32_S3_BLE-1.9.1.162.zip
### Was working before? On which version?
It worked before with a version …
-
Hi,
I use a custom board and I get "Configuration error 0x10000" - which means timeout initialising the SPI device.
But when I disconnect the other can bus device (works - verified) it initi…
-
To reproduce the issue:
Create new project for
**Adafruit QT Py ESP32-S2** board
Framework: **Arduino**
Open **src\main.cpp**
In setup(), add
**Serial1**.begin(115200);
Rig…
-
[Micropython](https://github.com/micropython/micropython) already supports [ESP32, ESP32-S2, ESP32-C3, ESP32-S3](https://www.espressif.com/en/products/socs).
However [lv_micropython](https://github.c…
-
When I try to update to a new firmware version, I always get a write error (code 2). If try it again I will receive error code 4. Than when I reboot, do an update and it will succeed. What am I missin…
-
Please add esp32 s3 support
-
I flashed the firmware into the esp32-s3 but it doesn't show me anything. What can I do about it?