-
tried building it with slint example - didn't work as expected.
https://www.waveshare.com/wiki/ESP32-S3-Touch-LCD-1.28
-
I'm going to steal Jeff's train of thought from #5179 but for the esp32s3 chip.
The Makerfabs MaTouch TFT 7" board has an SD card slot wired up for 1bit SDIO and using the [link](https://docs.espre…
-
Hello developer, I use esp32s3 n16r8 development board flash size 16M after brushing into the firmware or can not identify the wireless route, the source code needs to modify where to adapt?
-
i get this error .....Failed to resolve component 'esp32s3'
when i run this command make BOARD=GENERIC_S3
this is for lv_micropython (lvgl binding with micropython)
-
**Describe the bug**
On `esp32s3` the `CONFIG_ESPTOOLPY_FLASHMODE_QIO` Kconfig setting is available, but choosing it causes the build to fail.
**To Reproduce**
Steps to reproduce the behavior…
-
### Board
ESP32-S3-Matrix X1
### Device Description
Waveshared ESP32-S3-Matrix X1
### Hardware Configuration
no other devices
### Version
v2.0.16
### IDE Name
PlatformIO
### Operating System…
-
### Port, board and/or hardware
ESP32-S3 SPIRAM_OCT
### MicroPython version
MicroPython: 1.23.0
OS: Ubuntu 22.04
ESP-IDF: 5.2
### Reproduction
I am just compiling, nothing special.
### Expec…
-
**Is your feature request related to a problem? Please describe.**
@marchingband attempted to compile `usb_midi_host_example.ino`
and got the error `Compilation error: #error "Please Select USB Stac…
-
Hi,
got this error when added this line to TFT_eSPI.h 's setup file : #define TOUCH_CS 3 // was 1 got error //
why so?
Thanks.
`Arduino: 1.8.19 (Windows 7), Board: "ESP32S3 Dev Module, Disabl…
-
When I tried to compile for the ESP32S3, the arduinoIDE reported an error
```
note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma me…